Choose Your Network Rack Carefully

When you are putting together the plans for your server room, you are going to have to take a lot of equipment into consideration. One of the most important items you need to think very carefully about before you go too far is the type of network rack you plan to install all of your servers into. Your servers are going to generate a lot of heat and if your racks are not big enough to provide adequate ventilation you could end up with major problems.

A Good Network Rack Has Built in Warning Sensors and an Alert System

Unless you plan to physically monitor your servers 24 hours a day, you may find that a network rack that features a built in monitoring system may be your best choice. In most cases, these racks feature a built in system that monitors both temperature and humidity. If either of them go beyond established parameters, you are sent an immediate email alert so that you can address the problem.

Protect Your Servers with a Monitored Network Rack

Not only do you have thousands of dollars tied up in your servers, but you have hundreds of gigabytes of data stored on them that you cannot afford to lose just because they overheat. You have looked at every imaginable network rack configuration and wondered how you are supposed to know if there is a problem when you can’t be in the server room 24 hours a day.

Our Alert – A – Rack Network Rack System Solves This Problem

No matter what network rack you buy, you can still end up with a situation where either the temperature or the humidity end up exceeding acceptable limits. Our Alert- A – Rack server system can help you with this problem. Using a Zero U Environmental Sensor control, you can set the parameters for both temperature and humidity levels in the rack. If either exceeds the established limitations, you will be notified automatically via email so that you can do something about it before any damage can occur.