You Should Never Buy a Cheap Powerstrip

If you have been thinking of going to your nearest discount store to buy a powerstrip to supply power to a single computer or series of computers instead of buying one that is purpose built for the job as a way to save money you need to think about what you are about to do. Think about the cost of replacing all of the equipment that you are going to plug into that $5 powerstrip, you know the one you thought you were saving money buying.

A Cheap Powerstrip Will Not Protect Your System

If you decide to buy a cheap power strip rather than one that is designed to be used to protect sensitive electronic equipment, you will not be getting any protection from power surges. The average computer can be destroyed by a relatively small surge. If you are convinced that you are saving money by purchasing that $5 power strip, remember how much it cost you to buy everything that you are going to be plugging into it.

Today’s Powerstrip Is Not the Same as Those Your Father Used

The first style of powerstrip was little more than a series of outlets that were mounted in a housing with a power cord sticking out of the end.  If you spent a little extra money, you could buy one that had a power switch that illuminated when the power was turned on. With the advancement of computer technology the design of the power strip has advanced along with it.  These once simple devices are now available in an amazing number of complex designs.

The Powerstrip You Buy for Your Computer Is Designed to Protect

At one time the only protection a powerstrip could offer against power surges was an easy way to unplug multiple items at one time. You can now buy them with built in surge protection and voltage stabilization, intended to keep your expensive computers and peripheral equipment from becoming damaged if there happens to be a power surge on the lines.

1. Have You Been Using the Right Powerstrip for the Job?

No matter whether you are assembling a new server rack in your IT room or doing nothing more that adding another computer to one of the offices in your building, you are likely to end up using some form of power strip. The most important question is; are you using the right powerstrip for the job. At issue here is the fact that most people tend to grab the first strip they can get their hands on to plug everything into it.

You May Not Need a Surge Protected Powerstrip

Most of us have had the fact that we should always use a surge protected powerstrip drilled into our heads. However, these power strips are usually reserved for sensitive electronics such as your servers and peripheral equipment. If all you are plugging in is fans and other similar items, you will find using a non-protected power strips can cut down on your costs as these items less likely to be affected by a power surge.

 

Are You Using the Right Powerstrip?

Whether you are putting together a new server rack or adding another computer to one of the offices in your building, you are going to end up using some form of power strip. The big question is whether or not you are using the right powerstrip for the job. The problem here is that most people will grab the first strip they can get their hands on to plug everything into.

You Do Not Always Need a Surge Protected Powerstrip

While most of us have had the fact that we should always use a surge protected powerstrip, these are generally reserved for sensitive electronics such as your servers and peripherals. But if you are plugging in fans and others simple items like fans, you may find that you can use a non-protected power strips and save a little on your expenses and these items are far less likely to be affected by a power surge.

The Powerstrip Has Evolved

The earliest type of powerstrip was nothing more than a series of outlets mounted in a housing that had a power cord sticking out of the end, if you spent a little extra money, you could get one that had a power switch some of which were illuminated. As computer technology has advanced, so too has the design of the powerstrip. Today you can buy these once simple devices in any number of more complex designs.

The Computer Powerstrip Is Designed to Protect

Where once the only protection a powerstrip could offer you was an easy way to unplug multiple items at one time, today they come with built in surge protection and voltage stabilization intended to keep you expensive computers and peripheral equipment from getting damaged if there happens to be a power surge on the lines. Considering the high cost of today’s electronics, you should never use an unprotected powerstrip.

Before You Buy a Cheap Powerstrip

If you are planning to go to the nearest discount store to buy a powerstrip for a computer or series of computers in order to save the cost of buying one that is purpose built for the job, you need to stop and think. What you should be thinking about is the cost of replacing all of the equipment that you are going to plug into that $5 powerstrip that you thought you were saving money buying.

Never Trust a Cheap Powerstrip

When you buy a cheap powerstrip instead of one that is intended for use with sensitive electronic equipment such as computer, you are getting no protection whatsoever from power surges. Even today, a computer can be destroyed by a relatively small surge. If you think spending $5 is going to save you money, consider how hard it is going to be coming up with the hundreds of dollars you are going to have to spend replacing your computer and then look carefully at the power strips in our online catalog before you buy.