As you look at the servers in your racks, you should realize that you have thousands of dollars tied up in them. At the same time they have hundreds if not thousands of gigabytes of information stored in them that you cannot afford to lose simply because your servers overheated and crashed. No matter what type of network rack configuration you are using, you have no way of knowing there is a problem unless you have someone monitoring them 24/7.
The Alert – A – Rack Network Rack System Is Designed to Overcome This Problem
With most types of network rack you buy, you are likely to end up with a situation where either the temperature or the humidity exceeds acceptable limits. The Alert- A – Rack server system we sell is designed to help you with this problem. Using the Zero U Environmental Sensor control, you set the parameters for both temperature and humidity levels in the rack. When either exceeds the established limitations, you will be notified automatically via email. This will give you the time to do something about the problem before any damage can occur.
When you are putting together the plans for your server room, you are going to have to take a lot of equipment into consideration. One of the most important items you need to think very carefully about before you go too far is the type of network rack you plan to install all of your servers into. Your servers are going to generate a lot of heat and if your racks are not big enough to provide adequate ventilation you could end up with major problems.
A Good Network Rack Has Built in Warning Sensors and an Alert System
Unless you plan to physically monitor your servers 24 hours a day, you may find that a network rack that features a built in monitoring system may be your best choice. In most cases, these racks feature a built in system that monitors both temperature and humidity. If either of them go beyond established parameters, you are sent an immediate email alert so that you can address the problem.
Not only do you have thousands of dollars tied up in your servers, but you have hundreds of gigabytes of data stored on them that you cannot afford to lose just because they overheat. You have looked at every imaginable network rack configuration and wondered how you are supposed to know if there is a problem when you can’t be in the server room 24 hours a day.
Our Alert – A – Rack Network Rack System Solves This Problem
No matter what network rack you buy, you can still end up with a situation where either the temperature or the humidity end up exceeding acceptable limits. Our Alert- A – Rack server system can help you with this problem. Using a Zero U Environmental Sensor control, you can set the parameters for both temperature and humidity levels in the rack. If either exceeds the established limitations, you will be notified automatically via email so that you can do something about it before any damage can occur.