Check out our special close out pricing on our AmeriCool portable air conditioners – model numbers HPC3000 & HPC5000. The HPC3000 is 13,200 BTU and the HPC5000 is 21,000 BTU. Pricing is based on a first come first serve basis until supply is gone. Click link for more details. http://www.serverrackoptions.com/Store/air_conditioners.html
Our customers in the DFW Metroplex can now relax a bit knowing they can quickly pick-up a rackmount shelf or wallmount rack when they need it quickly. We have added a lot of new products that will server our national customers as well. Orders placed by 3pm CST will ship out the same day. See complete selection at http://www.serverrackoptions.com/Store/dfw_warehouse.html
When selecting a computer rack mount, you will need to take some measurements of your equipment. You will want to measure the width and length of the equipment, such as your network servers. The length may be referred to as depth for some rack mount models. The height should be measured and used to calculate the height of rack mount you will need. You should also account for the height of the shelves, when adding heights together.
Other Types of Equipment You Can Put in a Computer Rack Mount
A computer rack mount can be used for more than just computers and network servers. You can also use a rack mount for your audio, video, and monitoring equipment. By putting these types of equipment into a rack mount, it makes it easier to access the equipment. You have access to the front of the equipment, as well as unobstructed rear access. This makes is easier to connect cables, wiring and power cords and keep them from becoming tangled.
Server racks come in different widths, depths and heights. The width is the measurement in inches of your computer server or other type of equipment. You will want to measure the face of the unit to obtain this measurement. Once you have this measurement, you will want to measure the depth of the equipment. If the width is 19 inches or under and the depth is 30 inches or under, you can look at using a compact 19” server rack.
You Need Rack Mount Shelves for Your 19” Server Rack
You will need to look at different accessories for your 19” server rack in order to install your equipment. You will need to get rack mount shelves, which are secured to the server rack by using screws. Once the shelves are installed, you can then install your computer server or other equipment into the server rack.
There are different power options available for you to use to plug in your network servers and other equipment installed in a rack. There are several types of products which provide the same features, but can be called by different names. For example, a rack mount power conditioner is basically the same thing as a rackmount power strip. While one manufacturer will call their product a power conditioner, another manufacturer will call their product a power strip.
Choosing the Right Rack Mount Power Conditioner
Choosing the right rack mount power conditioner for your rack depends on the type of unit you require. If you already have a UPS with surge protection, then you may not require surge protection in your power conditioner. However, if you do not use a UPS, or it does not have surge protection, then you will want to look at power conditioners, which include surge protection.
When you are organizing your server room with server racks, you will need different types of accessories. One type of available accessory is rackmount shelves and drawers. These accessories are designed to fit inside the server rack to help hold, and support your network servers. Some styles of shelves are fixed, while other styles will slide out. In order to install these accessories in your server racks, you will need server rack screws.
Other Accessories Which Need Attached with Server Rack Screws
Other types of server rack accessories are designed to make your server racks look well organized. You can find rackmount blank, solid, and vented panels. These panels are used to fill in open gaps in your server racks. To help keep your network cables organized, you can use a rackmount cable management accessory. With this accessory, you run your network cables through the device, instead of letting them hang down the back of the server racks. You will need server rack screws to secure and attach these items to your server racks.
In certain locations in your building, you may be limited on the amount of space you have available for running network and telecommunication cables. The space limitations may not allow you to use full size server racks for mounting patch panels. One solution available is to use a wall mounted server rack. This type of server rack attaches directly to the wall, while keeping your cables and wiring off the floor.
For Easy Rear Access Use a Pivoting Wall Mounted Server Rack
Accessing the rear of a wall mounted server rack can be an issue when you need to add equipment. One option you can use is a pivoting wall cabinet server rack. This type of server rack allows you to open and pivot the rack, to gain access to the rear of your equipment. Once your equipment is installed, you are able to connect any required power cords and wiring from the rear. With a pivoting cabinet, you do not have to worry about making these connections before equipment installation.
Sometimes you will have space restrictions which can make setting up computer servers and equipment more difficult. However, all is not lost just because you cannot use a normal height server rack. Instead of putting your equipment and servers directly on the floor or setting them on a desk, you can look at using a half height server rack. This type of server rack can be placed under surfaces on the floor, or set on top.
A Half Height Server Rack Is Ideal When You Only Have One or Two Servers
When you only have one or two servers in use at your business, you may not require a normal height server rack. Using normal height server racks will leave a lot of unused space. You may want to consider using a half height server rack, instead. You can find models ranging from 3U all the way up to 25U, with depths available up to 32 inches.
Wiring closets can be a nightmare when you just have network cables plugged into patch boxes and laying around on the floor. Cables can be tangled together, which makes it difficult to determine which network relay matches which cable. You can take charge to clean up this nightmare by using a 2 post server rack. This type of server rack allows you to secure patch boxes and horizontal relay racks in between the two posts.
A 2 Post Server Rack Can Also Be Used to Organize Telephone Lines
Besides helping to organize your network cables, a 2 post server rack can also be used to organize your telephone lines. You can have different 2 post racks in the same wiring closet. You can use one rack for your network cables and the other one for your telephone cables. Consider using different colored cables, where you use one color for network connections and another color for telephone connections.
The size of computer servers has gotten smaller as manufacturing processes changed. Computer components were able to be made smaller and require less space. These small components still provided the same amount of computing power, if not more, than their larger counterparts. Computer servers, today, are much smaller and require less room. Instead of using large server racks to store your modern network servers, you can use a 19 inch server rack for shallow hardware.
A 19 Inch Server Rack Is Designed to Hold 19 Inch Wide Hardware
A 19 inch server rack may be a misleading term, when you are looking for a compact server rack. These models of server racks are designed for 19 inch wide rack mount hardware with varying depths all the way up to 30 inches. Besides holding computer servers, you can also use these compact server racks for holding your audio and video equipment.